Tsymo Pet Feeder Manual Pdf (2024)

FAQs

How to reset petlibro feeder manual? ›

Press and hold the Up button and the Down button for three seconds to reset the feeder to factory settings. When the feeder is powered on, press the button once and the feeder will dispense one portion of food. You can press the manual button up to five times and the feeder will dispense five portions of food.

be using the device for some time. 1) Press and hold the Unlocked Button for 3s to unlock other buttons and screen, the Current Time Setting Icon on the screen flashes, it indicates it enters setting mode.

On the front of the Smart Pet Feeder, you will find the 'feed' button. Press the 'feed' button for 5 seconds. When you hear a beep after about 5 seconds, this indicates that the reset has been performed successfully and the Smart Pet Feeder has been reset to factory settings.

Please set the current time before setting up feeding plan. Long press the Setting Button for 3 seconds, the Time Setting icon start to flash, which means it is in settings mode as shown in Fig1. Press Confirm/OK Button to confirm to enter the time setting. The hour is flashing as Fig2.

Use the end of a paperclip to press and hold the reset/ reboot button for 3-5 seconds until the LED blinks white to show a successful reboot. If the feeder successfully reconnects to your Wi-Fi with internet, the LED will blink blue and then turn solid showing it is fully connected and operational.

Reset the feeder to factory settings, holding down the Add Pet ( ) button for 10 seconds (until the light starts alternating red / green and the lid opens and closes). Then re-learn your pet(s) in to the feeder again - see page 8.

If the router or internet is not working, try resetting the router or contact your internet provider. Power cycle the feeder by turning off the power switch. Wait 10 seconds and turn the power switch back on. Check for other devices near the feeder that use the internet or other wireless signals (such as a microwave).

Unlocking the Screen

Press the SET button for three (3) seconds to unlock the screen and follow the instructions above to manage settings.

A short vacation or business trip might mean leaving your feline friend for 2 to 3 days. With careful planning, the automatic feeder and water fountain can ably manage their physical needs. However, these tools don't replace the emotional stimulation that interaction with you or another pet provides.

Divide their daily feed into at least four portions instead of 2 for older cats. Set the feeder to dispense the first serving early in the morning, then every 6 hours.

Will PETLIBRO work without WiFi? ›

Once the feeder is connected and meals are scheduled successfully, the feeder is ultimately powered by the adapter and power cable. If the WiFi goes out, the feeder will continue to feed according to the meal schedules. However, the feeding result will not show up in the feeding log until WiFi connectivity is restored.

Bring joy to hydration by placing the fountain in your cat's favourite place. Enjoy cordless freedom thanks to the fountain battery's long-lasting 30 day lifespan.

If you do not need to use the device for an extended period of time, you must turn the device off yourself. At the same time, hold down the bowl reset button together with the manual food dispenser button for 5 seconds. After you hear relevant voice notification, you can let go.

If your feeder has a flashing light indicating that it is offline, the feeder will continue to feed as previously scheduled if it has power. Verify home internet is working. If other wireless devices have also lost connection, consider resetting your router and/or contacting your internet service provider.